Checklist · Contracts
Turkish Contractor Prequalification: What to Ask For
Before awarding work to a Turkish contractor, there are seven documents worth requesting and three claims worth verifying independently. A buyer-side checklist.
Resources
Calculations, comparisons and checklists you need when making decisions about equipment rental, earthworks and contracting.
Checklist · Contracts
Before awarding work to a Turkish contractor, there are seven documents worth requesting and three claims worth verifying independently. A buyer-side checklist.
Case study · Contracting
Our first international job was motorway infrastructure and trench work. From shipping machines to keeping crews — the real cost lines of a cross-border site.
Comparison · Rental
Non-operated hire is cheaper on paper but transfers the whole liability to you. Which is right depends on the length of the job and whether you have a licensed…
Calculation · Cost
The daily rate is usually about half of what you actually pay. Transport, fuel, operator and overtime make up the rest. Six cost lines and a worked example.
Comparison · Technical
We produced drop channels and U-channels in our own precast yard and installed them along a 61 km section. Which works suit precast, which must be cast on site.
Guide · Contracting
Türkiyes major motorways run on the simultaneous output of dozens of subcontractors. Sections, chainage ranges, progress payments and acceptance — from the insi…
Glossary · Earthworks
The same volume of excavation is priced several times higher depending on its class. Seven classes, what each looks like on site, and the effect on plant select…
Guide · Rental
An oversized machine cannot manoeuvre and burns fuel; an undersized one cannot finish the job. Size classes, bucket capacities and a selection matrix by job typ…